Homepage > Control systems, PC and panels > PC Asem > OT1200
OT1200
Basic configuration: LCD TFT 8.4", Touch Screen
Intel Celeron M ULV 600MHz, 512 MB RAM, without frontal keys, fanless
| Optional equipment | |
| Display | LCD TFT 8.4" ▪ SVGA, 800x600, 16M colors ▪ LED backlight, 450 cd/m2 ▪ Viewing angle: 140° H, 160° V |
| LCD TFT 10.4" ▪ SVGA, 800x600, 256K colors ▪ 2 lamps, 400 cd/m2 ▪ Viewing angle: 120° H, 100° V | |
| LCD TFT 12.1" ▪ SVGA, 800x600, 16M colors ▪ LED backlight, 500 cd/m2 ▪ Viewing angle: 140° H, 160° V | |
| LCD TFT 12.1" ▪ XGA, 1024x768, 16M colors ▪ LED backlight, 600 cd/m2 ▪ Viewing angle: 150° H, 150° V | |
| LCD TFT 15" ▪ XGA, 1024x768, 16M colors ▪ LED backlight, 450 cd/m2 ▪ Viewing angle: 150° H, 150° V | |
| LCD TFT 17" ▪ SXGA, 1280X1024, 16M colors ▪ 4 lamps, 250 cd/m2 ▪ Viewing angle: 160° H, 160° V | |
| LCD TFT 19" ▪ SXGA, 1280X1024, 16M colors ▪ 2 lamps, 300 cd/m2 ▪ Viewing angle: 160° H, 160° V | |
| Touch Screen | No Touch-Screen |
| Touch-Screen 8.4" ▪ 5-wire resistive technology ▪ Controller integrated on-board | |
| Touch-Screen 10.4" ▪ 5-wire resistive technology ▪ Controller integrated on-board | |
| Touch-Screen 12.1" ▪ 5-wire resistive technology ▪ Controller integrated on-board ▪ Available also with Glass Film Glass | |
| Touch-Screen 15" ▪ 5-wire resistive technology ▪ Controller integrated on-board ▪ Available also with Glass Film Glass | |
| Touch-Screen 17" ▪ 5-wire resistive technology ▪ Controller integrated on-board ▪ Available also with Glass Film Glass | |
| Touch-Screen 19" ▪ 5-wire resistive technology ▪ Controller integrated on-board | |
| CPU | Intel Celeron M ULV ▪ 600MHz, 400MHz front side bus, 512KB cache ▪ socket 478 μFC-BGA |
| Intel Celeron 373 M ULV ▪ 1GHz, 400MHz front side bus, 512KB cache ▪ socket 478 μFC-BGA | |
| Frontal | Frontal panel with 4 configurable function keys |
| RAM Memory | 512 MB ▪ SODIMM DDR2 PC5300 (1 module) |
| 1 GB ▪ SODIMM DDR2 PC5300 (1 module) | |
| 2 GB ▪ SODIMM DDR2 PC5300 (1 module) | |
| HDD/SSD | Installation kit HDD/SSD 2.5" SATA (HDD/SSD not included) |
| Installation kit HDD/SSD 2.5" SATA (HDD/SSD not included) with PCI FANLESS add-on | |
| Installation kit HDD/SSD 2.5" SATA (HDD/SSD not included) with PCI with COOLING FAN add-on | |
| Installation kit HDD/SSD 2.5" SATA with predisposition for PC/104 plus add-on (HDD/SSD not included) | |
| HDD 160GB 2,5" ▪ SATA 2, 3Gb/s ▪ 5400rpm, 8 MB buffer | |
| HDD 250GB 2,5" ▪ SATA 2, 3Gb/s ▪ 5400rpm, 8 MB buffer | |
| SSD 2,5" SATA (Solid State Disk) | |
| Compact Flash | Compact Flash UDMA (SLC) |
| PCI & PC/104 | PCI FANLESS add-on kit (without HDD support) |
| PCI add-on kit WITH COOLING FAN (without HDD support) | |
| PC/104 plus add-on predisposition kit (without HDD support) | |
| Communication ports | RS-232/422/485 serial port ▪ DB15 male connector |
| RS-232/422/485 serial port ▪ RS-422/485 optoisolated ▪ DB15 male connector | |
| Parallel port SPP-EPP-ECP bidirectional ▪ DB25 male connector | |
| Power supply | External, DIN guide-installed power supply 230VAC --> 24VDC - 60W |
| Uninterruptable power supply (UPS) ▪ 15 minutes backup time (min) ▪ equipped with batteries ▪ mounted on PC's rear box | |
| Extension cable (length 1 m) for remote UPS installation | |
| Wireless | Wireless LAN Kit with USB interface (IEEE 802,11b/g) ▪ data rate max 54Mbps ▪ WEP 128bit |
| Fieldbus | NETCORE® X APCI fieldbus module |
| Fan | fanless |
| Warranty extensions | Warranty extension to 18 months on basic system and its variants |
| Warranty extension to 24 months on basic system and its variants | |
| Warranty extension to 36 months on basic system and its variants | |
Additional information:
1: Fanless PCI kit can be requested only if add-on cards have less than 3W of power consumption
2: RS-232/422/485 standard and optoisolated can be installed one as an alternate to the other only
3: ATA/100 (Master e Slave) controller is dedicated to the two Compact Flash slot
4: The mounting of the option affect the UL certificate validity
5: Glass Film Glass (GFG) touchscreen option: see Addendum page for the differences with standard touchscreen configuration
Warnings:
1: PCI, PC/104 plus and UPS kits can be supplied at OT1200 time of order only – THEY CAN NOT BE INSTALLED LATER
2: PC/104 plus predisposition and PCI kits can be installed one as an alternate to the other only
