SG 050

SG planetary gearboxes are available in two series:

SG – economy line (SG050, SG070, SG090, SG120 and SG155)

Economy line of SG series represents cost-effective solution for all kind of precise industrial applications. Backlash of SG economy gearboxes is from 8 up to 19 arcmin according to the size and number of gearbox stages.

SG – supereconomy line (SG040, SG060, SG080, SG115 and SG160)

Supereconomy line of SG series is designed mainly for precise applications with low load of gearboxes. Backlash of SG supereconomy gearboxes is from 6 up to 22 arcmin according to the size and number of gearbox stages.

Advantages of SG planetary gearboxes

economy and precise mechanical solution
ratio: 3 - 512
backlash 8 - 19 arcmin (economy line) a 6 - 22 arcmin (supereconomy line)
possibility of front flange customization on request
short delivery time (some types on stock), in case of non-standard components please contact us

Technical parameters of SG 050 (economy line)

No of stages		1 - stage						2 - stage
Ratio		3	4	5	7	8	10	9	12	15	16	20	25	32	40	64	100
Input shaft diameter		max. 11 mm						max. 11 mm
Nominal / maximum input speed	min^-1	5000/10000 (higher speed please consult)						5000/10000 (higher speed please consult)
Nominal output torque	Nm	11	15	13	8,5	6	5	12	15	13	15	15	13	15	13	7,5	5
Maximum output torque	Nm	17,5	24	21	13,5	10	8	19	24	21	24	24	21	24	21	12	8
Emergency stop torque	Nm	22,5	30	36	26	27	27	33	40	36	40	40	36	40	36	27	27
Torsional stiffness	Nm/arcmin	0,8 - 1,1						0,8 - 1,1
Inertia	kgcm²	0,015 - 0,030						0,014 - 0,026
Backlash	arcmin.	<15						<19
Efficiency	%	97						95
Operating temperature	°C	-25 .. +90						-25 .. +90
Service life	hours	30000						30000
Mass	kg	0,7						0,9
Noise	db(A)	58						58
Radial load	N	700						700
Axial load	N	800						800

Dimensions of SG 050

1/2 - stage, flange for TGN2, TGH2, TGT2

There is possible to change input flange on customer's request.